Before installing the decal, ensure that the decal is properly stuck to the transfer tape. Lay decals flat on a smooth table in an area that is at least 60º F and below 80º F. Take the squeegee application tool (or credit card) and press firmly over the whole surface of the decal while it is still laying flat on the table.
  • Use regular glass cleaner or rubbing alcohol and clean surface thoroughly. SURFACE MUST BE CLEAN OF DIRT, DUST, OIL, AND WAX. For optimum results, surface temperature should be above 50ºF and below 90ºF.
  • If the decal goes on freshly painted surface, ensure that you wait at least 60 days before applying on it.
  • Begin to peel the transfer tape (Make Sure The Decal Stays On The Transfer Tape).
  • Put the transfer tape (with decal) on the surface.
  • Starting from the top center, slowly and firmly begin to apply the sticky side of the decal to the application surface with a plastic squeegee (you can use your credit card or ID).
  • Let it sit for about 30 seconds. This will help release the adhesive from the transfer tape. Begin removing the transfer tape peeling from one of tape top corner to the bottom of the opposite corner. Any small bubbles can be removed by poking a small hole and pushing the air out of the bubble with finger.
How to Apply tall decals
Before installing the decal, ensure that the decal is properly stuck to the transfer tape. Lay decals flat on a smooth table in an area that is at least 60º F and below 80º F. Take the squeegee application tool (or credit card) and press firmly over the whole surface of the decal while it is still laying flat on the table.
  • Use regular glass cleaner or rubbing alcohol and clean surface thoroughly. SURFACE MUST BE CLEAN OF DIRT, DUST, OIL, AND WAX. For optimum results, surface temperature should be above 50ºF and below 90ºF.
  • If the decal goes on freshly painted surface, ensure that you wait at least 60 days before applying on it.
  • Without removing the paper in the back place the decal on the surface. Use the top portion of the tape to fix the decal on the place.
  • Leave the top portion of the tape on. Start applying the decal from top to bottom by removing the paper from back of the decal with one hand and applying the decal with the other hand. (use squeegee or a credit card)
  • Let the decal sit for about 30 seconds and then remove the transfer tape slowly. (Any small bubbles can be removed by poking a small hole and pushing the air out of the bubble with finger.)
Installation instructions widened decals
Before installing the decal, ensure that the decal is properly stuck to the transfer tape. Lay decals flat on a smooth table in an area that is at least 60º F and below 80º F. Take the squeegee application tool (or credit card) and press firmly over the whole surface of the decal while it is still laying flat on the table.
  • Use regular glass cleaner or rubbing alcohol and clean surface thoroughly. SURFACE MUST BE CLEAN OF DIRT, DUST, OIL, AND WAX. For optimum results, surface temperature should be above 50ºF and below 90ºF.
  • If the decal goes on freshly painted surface, ensure that you wait at least 60 days before applying on it.
  • Clean the surface thoroughly using alcohol or Windex. Surface must be clean of dirt, dust, oil, and wax.
  • Without removing the paper in the back place the decal on the surface. Use the side portions of the tape to fix the decal on the place.
  • Leave the right portion of the tape on. Start applying the decal from right to left by removing the paper from back of the decal with one hand and applying the decal with the other hand. (use squeegee or a credit card)
  • Let the decal sit for about 30 seconds and then remove the transfer tape slowly. (Any small bubbles can be removed by poking a small hole and pushing the air out of the bubble with finger.)
How to Remove the DECAL
Heat the area where the decal is with a blow dryer and just peel the sticker back off.

If there is any sticker adhesive still left on the window just clean it off with window cleaner.

If the adhesive still left on the paint use "Bumper Sticker Remover" then polish the area with a Car Wax.

Decals are not reusable. Once you've applied the decal you can not use it again.
How To Apply A Vinyl Decal youTube videos



YouTube Video
How to Apply a Small Decal


YouTube Video
How to Apply a Tall decals


YouTube Video
How to Apply a Widened decals


YouTube Video
The Right Way to do a Wet Application
Contact Us
Find My Order
Return Policy
Privacy
Feedback
Clipart
New Designs
Photo Gallery
Testimonials
© 2003-2015 decalboy.com
About Decal
Decal Application
Make Decal from Image
Decal Templates
Lic. Frame Templates
Make Vinyl Lettering
2700 Colorado Blvd Los Angeles, CA 90041
TEL: 310.572.9199